Glued panels

Glued panel with finger-joint lamella

  • Humidity 8%, plus minus 2%
  • D3 glue; D4 glue on customer’s request
  • Sanded surface; rub 120
  • Dimensions: Thickness 16-60 mm, maximum width 1300 mm, maximum length 6000 mm
  • Lamella width 40-50 mm; uniform size within one board
  • Length optimization
  • On customer’s request:
    • Table boards on A/B or A/C quality with an A quality outer lamella (four-sided clear)
    • Bevel edges: 1 or 2 edges, one-sided / both-sided
    • Oiling
    • Single packaging: Each board is wrapped separately in a stretch foil
  • Varieties:
    • LUXE: Lamella width 40-50 mm (uniform size within one board), lamella length 350-600 mm (random))
    • STANDARD: Lamella width 40-50 mm (uniform size within one board), lamella length 150-600 (random)
    • ECONOMIC: Lamella width 30-39 mm (uniform size within one board), lamella length 150-500 (random))
  • Special versions:
    • „AMERICAN BOARD“: Thin lamella glued on wider edge; maximum lamella thickness 60 mm, max. lamella width 20 mm, lamella length 200-500 mm (random)
    • Glued block (block foot): Maximum profile 150×150 mm, length 300-6000 mm
  • Quality categories

    Click on the title above to see the quality categories.

    BEECH

    • A (four-sides clear): No defects, no heartwood, no knags, no colour nuances
    • B: No knags, no blue stains, max. 25% of red heartwood; few black dots up to 4 mm are allowed
    • A/B (one-side clear): Combination of A + B quality; one side with A quality, B-quality side with max. 25% of red heartwood
    • C „rustic“: No rot, no insect damage, no cracks; red and black heartwood is allowed, black dots up to 8 mm allowed

    OAK

    • A: No sapwood, no knags, no cracks, no black dots
    • B: Sapwood up to 10% of the surface allowed, black dots up to 5 mm allowed
    • C “wild oak”: Sapwood allowed, knags up to 20 mm allowed

    AMERICAN WALNUT

    • A: No sapwood, no knags, no rot; few black dots allowed
    • B: Sapwood up to 10% of the surface allowed, knags up to 10 mm allowed; knag holes filled with a black filler
    • C: Sapwood and knags allowed; knag holes filled with a black filler

Edge-glued panel (continuous lamella)

  • Humidity 8%, plus minus 2%
  • D3 glue; D4 glue on customer’s request
  • Sanded surface, rub 120
  • Dimensions: Thickness 16-60 mm, width maximum 1300 mm, length maximum 6000 mm
  • Lamella width 40-50 mm; uniform size within one board
  • Length optimization
  • On customer’s request:
    • Table boards on A/B or A/C quality with an A quality outer lamella (four-sided clear)
    • Bevel edges: 1 or 2 edges, one-sided/both-sided
    • Oiling
    • Single packaging: each board is wrapped separately in a stretch foil
  • Special versions:
    • „AMERICAN BOARD“: Thin lamella glued on wider edge; lamella thickness maximum 60 mm, lamella width max. 20 mm
    • Glued block (block foot): Maximum profile 150×150 mm, length 300-6000 mm
  • Quality categories

    Click on the title above to see the quality categories.

    BEECH

    • A (four-sides clear): No defects, no heartwood, no knags, no colour nuances
    • B: No knags, no blue stains, max. 25% of red heartwood; few black dots up to 4 mm are allowed
    • A/B (one-side clear): Combination of A + B quality; one side with A quality, B-quality side with max. 25% of red heartwood
    • C „rustic“: No rot, no insect damage, no cracks; red and black heartwood is allowed, black dots up to 8 mm allowed

    OAK

    • A: No sapwood, no knags, no cracks, no black dots
    • B: Sapwood up to 10% of the surface allowed, black dots up to 5 mm allowed
    • C “wild oak”: Sapwood allowed, knags up to 20 mm allowed

    AMERICAN WALNUT

    • A: No sapwood, no knags, no rot; few black dots allowed
    • B: Sapwood up to 10% of the surface allowed, knags up to 10 mm allowed; knag holes filled with a black filler
    • C: Sapwood and knags allowed; knag holes filled with a black filler